A condiments caddy for the dining room or...
... a convenience caddy for the bedroom The itch started when I noticed the awkwardly placed and unwieldy plastic table that holds the condiments in a corner of our dining room. It was eating up a lot of space which was not fully utilized, and the lower rack is exclusively used by the cats as a bunk bed. Planned to build something with a smaller footprint and on casters, so that the usability and mobility factor increases. Once I got my Metabo table saw, I dismantled the home built saw/router table and reclaimed some 19mm plywood and Sal wood battens from it. Also I had some 12mm plywood scrap pieces from previous projects . And I have some laminates lying around too. I determined the above would be enough to complete this project. Got the 12mm 19mm plywood and the Sal battens sized up, planed and squared. Cut the corners of the bottom and middle racks to accommodate the posts. Put pocket holes, 2 in each corner. And then glued and screwed the posts...